World Of Concrete 2004

the concrete business opportunity

SPECIALS   HOME PAGE     REQUEST A FREE CATALOG

TRAINING DVD'S NOW AVAILABLE!        TRAINING SCHEDULE


Distributor Locator

Distributorships are available!

CLICK MAP TO FIND A DISTRIBUTOR

Why choose Renew-Crete?

Why Renew-Crete is better!
What our customers have to say.
Startup packages are available.
Spray Coat starter package
Stamped Concrete starter package.
The best of both worlds
If you are really serious!
The best bang for your buck!
We Train you right!
Decorative Concrete Training
We make it easy to attend!

Training DVD's

Acid Stained Concrete
Decorative concrete color
Integral Colors
Plastic Concrete Forms
Spray Coat
Stamped Concrete Surfaces

Concrete Counters

Re-Coat

Patch-It Stain Base

Concrete Stencils

Decorative Concrete Catalog
Decorative Concrete Photo Gallery
Check here often!

pdcs_show.jpg (706407 bytes)

Renew-CreteŽ Information - Catalog Request Form   HOME PAGE

 

Renew-CreteŽ Liquid "Bubble Gum" Release

Renew-CreteŽ
Liquid Release Agent

Bubblegum Liquid Release Agent
THE ORIGINAL BUBBLE GUM RELEASE FORMULA
hr01.gif (2152 bytes)
Basic Information: Liquid Release Agent
1-Pail = 33-lbs [15-kgs]  Coverage approx. 1000 sq. ft.

    Renew-CreteŽ Liquid Release is a parting agent used to keep texturing mats from sticking to the still plastic concrete.  It also prolongs the life of the texturing mats by decreasing the friction between the texturing mat and the concrete.  It forms a lubricating and parting barrier separating the texturing the concrete from the texturing mats.
        Using a pump type sprayer,  like our   SP-35WC  liberally spray a mist of  Renew-CreteŽ Liquid Release on colored concrete where you are going to place the next few texturing mats.  Do not apply over an area of more then ten or fifteen square feet as the Liquid Release may evaporate before the mats are placed over it.
         To maintain the integrity of the concrete surface, do not trowel or in any way mix the Liquid Release with the surface.  To make corrections on the still plastic concrete use the texturing mat and press out the unwanted impression.  No removal of Liquid Release is necessary.  When the texturing application is completed, wash off the Liquid Release from the texturing mats using soap and plain water. 
           Renew-CreteŽ  Liquid Release is formulated to be used with most texturing mats.  However, test a little on texturing mats to insure compatibility before using.      Renew-CreteŽ Liquid Release is the Original  ''BUBBLE GUM'' release agent, Accept no Imitations!

Great For:

Stamped Concrete

Thin Stamped Overlays

 

Specs:

Product Name: Liquid Release (LR)

Product Class: Hydrocarbon Release Solution

Features:

  • 100% evaporating
  • No clean up required!
  • Pleasant bubblegum scent
  • Eliminates the need for messy powder release agents.

Properties:

  • Appearance: Clear, colorless, solution
  • Smell: Bubble gum
  • Flash Point: 105° F minimum
  • Boiling Range: 313 degrees to 495 degrees F
  • Evaporation Rate: Slower than Ether
  • Weight per gal.: 6.52 Lb.
  • Vapor Density: Heavier than Air
  • % Volatile by Volume: 97.7
  • Application temperature: 40° - 100° F

Available Packaging:

  • Stock 5 gallon pails
  • Stock 55 gallon drums
  • Special Order - Inquire

Suggested Storage:

  • Store in a cool place
  • Shelf Life - 1 year


 


Toll Free 866-531-9779
International Inquiries Call Off 407-677-6267 Fax 407-677-7978
Copyright © 2002 Professional Decorative Concrete Services, LLC / Renew Crete Systems
 
                                                                                                            


Toll Free 888-287-8962
International Inquiries Call Off 321-636-8882 Fax 321-636-7343

Copyright © 2001-2007  Renew- Crete Systems ,Inc.