|
Technical
Data Sheet
1.
PRODUCT NAME
Renew-Crete®
Sealer
A high
solid, Clear acrylic sealer and water repellent
for concrete and brick surfaces.
SOLVENT-BASED
2.
PRODUCT DESCRIPTION
Renew-Crete®
Sealer is
a high performance acrylic sealer, which leaves
a protective membrane on the concrete surface
that both waterproofs and seals. It contains no
silicones, waxes, or oils, and does not chip or
peel when applied properly. Formulated with
methyl methacrylate copolymer resins, aromatic
solvents, and special additives which result in
an extremely tough acrylic surface that has many
special qualities. Renew-Crete® Sealer
penetrates deep into the concrete pores
providing unusual durability and protection.
Treated surfaces shed water, dirt, soot and
chemical contaminants to prevent staining and
moisture damage to the matrix. It will also
enhance the color of integral colored concrete
or exposed aggregate concrete by giving it a
"wet glossy look". Because of the
unusual characteristics of this formulation, it
may be used for many different applications.
Advantages
Brightens
and weatherproofs exposed aggregate walls and
sidewalk areas.
Dries
hard - will not attract dirt, airborne dust or
grime.
Reduces
moisture entry into concrete surfaces and helps
prevent efflorescence.
Is
quick drying - dry to touch in 3O-4O minutes.
Basic Uses
Renew-Crete®
Sealer is widely used on concrete and brick
substrates to protect against soiling by airborne
contaminants or other materials, which by
absorption would cause unsightly substrate
discoloration. Renew-Crete® Sealer offers surface
protection plus water repellency and color
enhancement.
Patterned
& Stamped Concrete: It
is particularly effective on textured patterned
concrete surfaces where the irregular texture
pattern readily traps dirt and other particles
causing discoloration.
Decorative
Polymer Concretes:
Provides a high performance, tough, durable,
protective, topcoat seal. Enhances the color of
surfaces and provides additional chemical and
abrasion protection.
Concrete
Pavers: Brings
out color & protects paver from fading or
color change due to weathering. Helps seal against
spillage.
Light
Weight Concrete Block: Penetrates
into concrete block pores for in-depth protection
against moisture. Retards the moisture exchange in
concrete that brings soluble concrete salts to the
surface.
Architectural
Concrete: Reduces
lime leaching which can etch tinted colored glass,
aluminum, etc. Brings out the fresh wet look color
of aggregates.
Common
and Face Brick: Prevents
stains from penetrating into the brick surface.
Dried film provides protection against chemical
attack and makes brick easier to clean.
Texturing
Additive
Rhino-Grip®
is a micronized crystalline polymer that is
specially machined to provide a unique texturizing
(slip resistant) aggregate for Renew-Crete®
Sealer. The particle size is carefully
controlled to produce a uniform moderate textured
type surface. The rounded shape of Rhino-Grip®
particles will provide optimum abrasion resistance
without irritating sharp edges thus allowing for
easier surface cleaning than other aggregate
textured surfaces. Rhino-Grip® is gentle to bare
feet when compared to silica texturing type
aggregates making it a high priority item for pool
decks and patio areas.
KEEP
OUT OF THE REACH OF CHILDREN
Contains
a petroleum distillate Keep away from heat or
open flame
Clean Up
Clean
brushes, tools, sprayers, rollers and other
equipment with lacquer thinner, toluene, or Xylene.
3.
COVERAGE
200
to 400 square feet per gallon (4.9 to 9.8 m2/liter)
depending upon usage. Coverage varies with texture
and porosity of surface.
4.
PACKAGING
55
gallon (209 liter) drum
5
gallon (19 liter) pail
|
